Table of Contents
Advertisement
PAGE
BATTERY & ALARM
12 12 12 12 12
BATTERY CONDITION
You can check the power level of the battery to
avoid battery depletion.
1
BATTERY
Press
out of the charging cradle. The following
display will appear when batteries are fully
charged:
BATTERY
PROGRAM
BATTERY
2
As the battery discharges, the stack
symbols will disappear, starting from the
right. When the battery is low, the display
will look like:
3
Charge the battery for 12-15 hours
before using the cordless handset for the
first time.
BATTERY
AUTO
25 CHANNEL
when the handset is
NAME/DATE
BATTERY
PROGRAM
NAME/DATE
SEND
DELETE
CALLER ID
LOW BATTERY
INDICATOR
The CP-725 will automatically detect a low
battery. If this happens, you will hear a double
beep, and the "Low Battery" display will appear:
<LOW BATTERY>
If the Low Battery indicator appears while you
are talking on the CP-725, you may only have a
few minutes left before the battery discharges
completely, in which case you will be discon-
nected. To prevent this, simply pick up an
extension phone and place the CP-725 back in
the charger. Place the handset in the charger for
12 - 15 hours to recharge the battery.
NOTE: The batteries can be recharged many times, but if you
get a low battery indication even after 12-15 hours of charging,
you should replace the battery pack. See page 35, the
Accessories order form to purchase a battery pack.
OUT OF RANGE ALARM
The CP-725 cordless handset operates
like any other cordless handset. You can
use it in the yard, at the pool, at the
mailbox, or any place within the operating
range of the charging cradle. If you move
out of the charging cradle's operating
range, you may hear a warning tone and/
or static interference. Move closer to the
charging cradle to deactivate the alarm. If you
remain out of range for too long, the CP-725 will
disconnect from the line.
If the handset loses its security code, you will
also hear an alarm tone. To reset this security
code, place the handset in the charging cradle
for a few seconds. Pick up the handset and try
your call again.
Interference from other appliances may also
cause the alarm to sound. To prevent interfer-
ence, move the charging cradle to another
location and fully extend its antenna.
Advertisement
Table of Contents
