Management > Wan Setup - Huawei R2561 User Manual

IDU R2561
User Guide
The Setup Wizard will guide you to do the important setting of the device.
Step 1 By press the "Next" button to start Wizard, we will guide you to set up your Time zone.
Step 2 1. Selection your locate country, NTP server and location time zone, and check if your
Location have daylight saving. 2. Review all your settings, if no problem, please press
"Next".
Step 3 Set up your 2.4GHz and 5GHz Wi-Fi network name/Encryption and Wi-Fi Password, then
press "Next".
The Service Set ID (SSID) that identifies the Wi-Fi network. The SSID is case sensitive and
can
consist of up to 32 alphanumeric characters.
Following characters is valid for Network Name (SSID).
Step 4 Check your settings again and then press "Save" button to apply the change.
----End
4.1.2 Management > WAN Setup
This page is information only, here displays the current status of the device such as system
uptime and WAN information. You can refer to below column for detail definitions.
Issue 01 (2019-02-28)
Click the "Next" button to launch the Setup Wizard.
Click the "Previous" button to go back to the previous page
Click the "Cancel" button to return to the first page.
Click the "Save" button to save any modified settings.
Copyright © Huawei Technologies Co., Ltd.
4 Reference Manual
17