Advanced > Port Triggering - Huawei R2561 User Manual

IDU R2561
User Guide
LAN Port
Enter the port number for LAN side.
LAN IP
Enter the IP address that identifies the IP subnet of the remote network.
Enabled
Select this check-box to enable/disable port forwarding for the specific IP.
4.4.4 Advanced > Port Triggering
Port triggering is a way to automate port forwarding: outbound traffic on predefined ports
('triggering ports') causes inbound traffic to specific incoming ports to be dynamically
forwarded to the initiating host, while the outbound ports are in use. This allows computers
behind a NAT-enabled router on a local network to provide services that would normally
require the computer to have a fixed address on the local network. Port triggering can open an
incoming port when a client on the local network makes an outgoing connection on a
predetermined port or range of ports. In the Port Trigger page you can specify up to 15 rules
with parameters for Port Triggering. The following configuration parameters are available:
Figure 4‑ 31 Port Triggering
Select
Select this check-box and press Del button to delete this row.
Application Name
Issue 01 (2019-02-28)
Use the Add or Del buttons to add the rule to the group or clear it from
the group, please click Apply button to confirm the Add or Del.
Click the Undo to clear the changes that you have made to this
window.
Click the Apply to activate your changes.
Copyright © Huawei Technologies Co., Ltd.
4 Reference Manual
43