Huawei R2561 User Manual page 58

IDU R2561
User Guide



5GHz Wi-Fi







Issue 01 (2019-02-28)
your environment condition.
Maximum connection number
The maximum Wi-Fi clients can connect to device at the same time.
AP Isolation
When the AP isolation is set to OFF: All the connected Wi-Fi clients can ping each
other.When the AP isolation is set to ON: The Wi-Fi clients can't ping each other
ACL
In this section you can add MAC addresses of clients which are allowed to access the
system, or denied from accessing.
1. Select either of Disable, Allow or Deny.
2. For the Allow and Deny lists, click Insert to add a MAC address to the list, and
specify the details.
Working Mode
It shows what Wi-Fi standard protocol is supported 802.11 a/an/ac is supported.
HT Mode
The HT mode is channel bandwidth. You can select 20MHz or 20/40MHz or
20/40/80MHz to affect the performance on your network.
Radio Channel
The radio channel is used by the unit and its clients to communicate with each other.
This channel must be the same on the unit and all of its wireless clients. The available
channel settings are limited by local regulations.
Power Level
The power level High/Middle/Low stands for Wi-Fi Tx power, you can adjust it base on
your environment condition.
Maximum connection number
The maximum Wi-Fi clients can connect to device at the same time.
AP Isolation
When the AP isolation is set to OFF: All the connected Wi-Fi clients can ping each
other.When the AP isolation is set to ON: The Wi-Fi clients can't ping each other
ACL
In this section you can add MAC addresses of clients which are allowed to access the
system, or denied from accessing.
Step 1:Select either of Disable, Allow or Deny.
Step 2: For the Allow and Deny lists, click Insert to add a MAC address to the list, and
specify the details.
Click the Undo to clear the changes that you have made to this
window.
Click the Apply to activate your changes.
Copyright © Huawei Technologies Co., Ltd.
4 Reference Manual
54