Huawei R2561 User Manual page 44

IDU R2561
User Guide
Current MAC filtering Status
Shows the MAC filtering function is disable or enable.
To enable or disable, you need to go to the Basic > Firewall level to change the firewall
setting.




MAC filtering Mode
Select MAC filtering by Whitelist or Blacklist


Select
Selecting this check-box and press Del button to delete this row.
MAC address:
Please key-in the client device which you want to do the MAC filtering MAC address.
Enabled
Select this check-box to enable/disable filter for the specific client device's MAC address
Issue 01 (2019-02-28)
Low: Filtering disable
Medium: Filtering enable, you can set filtering by blacklist or whitelist on MAC
filtering mode.
High: Filtering enable, you can set filtering by blacklist or whitelist on MAC filtering
mode.
Custom: You can customize if you want to Disable or set Blacklist/Whitelist
Blacklist: Block internet access which listed on the blacklist.
Whitelist: Will ONLY allow the units listed on the list to access the network.
Use the Add or Del buttons to add the rule to the group or clear it from
the group, please click Apply button to confirm the Add or Del.
Click the Undo to clear the changes that you have made to this
window.
Click the Apply to activate your changes.
Copyright © Huawei Technologies Co., Ltd.
4 Reference Manual
40