Monogram ZIBI240HII Installation Instructions Manual page 9

STEP 2 REVERSING THE DOOR
(Cont.)
• Install the new left bottom hinge pin and new door stop
that are enclosed in the hardware bag.
• Install the bottom trim onto the new bottom side of the
door.
• Remove 2 screws to remove the toe kick (do NOT
discard).
• Remove 4 screws to remove the
bottom right hinge (discard the hinge).
• Install bottom left hinge that is
enclosed in hardware bag with
existing screws.
• Remove the plastic cap from the top left corner of the
toe kick and discard.
• Attach the new plastic cap that is
enclosed in the hardware bag to
the top right corner of the toe kick.
• Reinstall toe kick to unit with 2
existing screws.
• To install the door, set the door
onto the left bottom hinge pin.
Holding the door in place, insert
the new top left hinge pin into the
door and secure the hinge to the
case with screws.
31-51544-11
Installation Instructions
(ZIFI240 model only)
STEP 2 REVERSING THE DOOR
(Cont.)
WARNING
Follow all steps when reversing the
door swing. Failure to follow these instructions, leaving
off parts, or overtightening screws, can lead to the door
falling off and result in injury and property damage.
• Remove top hinge and discard. Hold the door in
place.
• Remove the black screw-hole cover from top left of
cabinet and insert in top right.
• Remove 2 screws tor remove the toekick (do not
discard).
• Remove bottom right hinge and discard the hinge.
Keep the screw for installation of the new hinge.
• Attache the bottom left hinge with the screw from the
previous step.
(ZIFS240 model only)
9