CONTENTS
Important Information .................................................2
Parts Required ..............................................................3
Tools, Hardware ...........................................................3
ZIFI240 AND ZIBI240 MODELS ONLY
PARTS REQUIRED
• Custom handle
• Assembled overlay panel
• Screws
TOOLS/HARDWARE REQUIRED
• Adjustable wrench
• Carpenter's glue (ZIFI240 and ZIBI240 models only)
• Screwdriver (ZIFI240 and ZIBI240 models only)
31-51544-11
Installation Instructions
PARTS SUPPLIED
• Handle side trim
• Optional black or
stainless steel toekick
STAINING WOOD DRAWER FRONTS
The drawer fronts are unfinished cherry wood. During
use, oil from hands may accumulate and stain the
wood.
• The drawer fronts may be stained and sealed to
match adjacent cabinetry.
• Apply the stain and sealer according to the
manufacturer's instructions. To avoid unpleasant odor,
keep the door open to ventil ate and allow the stain/
sealer to dry completely before using the product.
CARING FOR YOUR STAINLESS
STEEL
• Before installation or first use, we strongly advise that
you polish the stainless steel exterior and handle with
a commercially available stainless steel cleaner such
as Stainless Steel Magic.™ To preserve and protect
the fine finish, we also strongly advise that you apply
stainless steel cleaner monthly.
REFRIGERATOR/FREEZER
LOCATION
■ Do not install the refrigerator/freezer where the
temperature will go below 55°F (13°C). It will not run
often enough to maintain proper temperatures.
■ Do not install the refrigerator/freezer where
temperatures will go above 100°F (37°C). It will not
perform properly.
■ Do not install the refrigerator/freezer in a location
exposed to water (rain, etc.) or direct sunlight.
■ Install it on a floor strong enough to support it fully
loaded.
3
Need help?
Do you have a question about the ZIBI240HII and is the answer not in the manual?