Advertisement
Troubleshooting
Error
1. Check whether the power plug is firmly in-
serted in the socket.
2. Check whether the power switch of the
Motor has a
cleaner is turned on.
rotation fault.
3. Check whether a small plug on the hose is
inserted in the socket above the machine
head. Turn the power switch on the hose
handle on (only for the manual version).
1. Check whether the nozzle, hose and con-
necting pipe are blocked.
2. Check whether the dirt and dust bag is full.
3. Check whether the filter sponge and bag
Suction
is
are blocked.
weakened.
4. Check whether the connecting pipe is con-
nected well.
5. Check whether the handle air volume
switch is fully turned on.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Possible cause
Item 61542
Solution
Insert the plug in the socket again
and guarantee the power socket to
be on.
Turn on the power switch.
Insert the small plug and turn on
the power switch on the hose
handle.
Remove blockage in time.
Discard dirt and dust.
Wash the filter sponge and bag.
Install the connecting pipe again.
Turn off the air volume switch but-
ton.
Page 6
02
2021-1
Advertisement
