WilTec 61542 Operation Manual page 5

Introduction to operation of automatic type
№ Name
1 Four-section plastic pipe
2 Water outlet pipe
3 Hand nozzle
Check whether the machine parts delivered are damaged after receiving the product, then

open the box and take out the machine to assemble it as shown in the figure.
Please note to check the two ends of the pipes whilst mounting the water outlet pipe and con -

necting the side without a rubber band on the inside with the complete machine.
The connecting mode of the automatic control suction pipe is as shown in Fig. 1.

The bag placement mode and position are as shown in Fig. 2.

The filter sponge placement mode and position are as shown in Fig. 4.

Press the switch button, extend the hose and hand nozzle to the pool for suction.

After finishing the suction process, turn the power switch off and pull out the plug. Dismantle

the connecting pipe and hose, and place the flat suction and hand nozzle on the accessory
socket of the machine head as shown in Fig. 3.
Wash the bag and filter sponge with water while cleaning the complete machine.

Figure 1
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
№ Name
4
5
Figure 2
Item 61542
Automatic control unit
Suction hose of automatic control unit
Figure 3 Figure 4
Page 5
02 2021-1