Menu Map - OCI BDL800IR Instruction Manual

Copy Standard to
All
Outgassing Timer
Start-up Mode
Filament Forming
Mode
Filament On/Off
Rate

6.2 Menu Map

The figures below provide a graphical representation of the LPS300-D menu in LEED and
AES mode.
30 Chapter 6 Programming Menu
Max Beam Energy
Scan
Max Screen Voltage
Propagates settings stored in Standard program to Stand-by, LEED1–
5 or AES1–5, and Outgassing.
Sets for how long outgassing will run as well as a program that will
be selected when the outgassing is finished.
Select Program
Cable Self-Test
Default Set
Shutdown
Filament Start Rate
Filament Operating
Rate
Sets the upper bound for beam energy scan.
Sets the maximum allowable screen voltage.
Sets the default program selected upon pow-
ering up the unit: Stand-by or Last Opened.
Sets whether to run a connection self-test on
start-up time.
Sets the filament current value to which it
will defaults after a filament forming proce-
dure.
Selects whether the Shutdown program will
be executed after a filament forming proce-
dure.
Sets the initial filament current ramp up rate.
Sets the operating filament current rate of
change.