Casio YC-400 User Manual page 141

Error Messages
I Other Error Messages
Error Message
The camera is not turned on
or there is no USB connection.
Correct the problem.
The file name could not be
changed. The name you
specified is already used by
another file. Specify a different
name.
Explanations for other error messages can be found in PJ Camera Software help
(English).
Cause and Required Action
You attempted to perform an operation that involves the PJ
Camera (Document Camera Mode, Scanner Mode, Camera
Image Mode, Projection Area Capture, Board Area
Capture) while the PJ Camera is turned off or not
connected. Check the following points and make necessary
corrections.
Is the PJ Camera mounted on the PJ Camera Stand?
Is the PJ Camera Stand properly connected to the
computer using a USB cable?
Is the PJ Camera turned on?
You attempted to rename an image file in the PC Image
Mode, Camera Image Mode, or Scanner Mode to a name
that has already been used for another file. Specify a
different name.
141