Casio YC-400 User Manual page 35

Using the PJ System Like an OHP Projector (Document Camera Mode)
5.
Repeat step 4 as many times as necessary to project all of the images
you want.
6.
To scroll back to a previously projected image, select [Back] on the
[View] menu.
To scroll forward through images, select [Forward] on the [View] menu.
For details about other operations you can perform while projecting document camera
images, see "Operations Available During Projection in the Document Camera Mode"
(page 43).
7.
To quit auto projection, select [Exit] on the [File] menu.
This exits PJ Camera Software and turns off the PJ Camera.
All buffered images are deleted at this time.
[Auto] automatically detects when the document on the document stage stops moving,
and then records and projects its image. Even if you are still holding the document,
[Auto] will record its image if it detects that it has stopped moving. If [Auto] automatically
records the document before you are ready, remove the document and then replace it
onto the document stage to re-record its image.
Writing or other marks on the document stage can interfere with proper document
detection. Never write on the document stage and take care to guard against scratching
or otherwise damaging it.
You can zoom and rotate a projected document camera image while it is being projected,
and save the result as an image file for later use. For details about such operations, see
"Operations Available During Projection in the Document Camera Mode" (page 43).
[Back]
[Forward]
35