Editing The Projected Image - Casio YC-400 User Manual

Using Projection Features

Editing the Projected Image

You can perform contour extraction or brightness correction on the currently projected image.
To save the results of your edit and apply them to the image file, select [Save] or [Save
As] on the [File] menu. For details about saving data to an image file, see "Saving the
Projected Image" (page 93).
Specifying the Contour of a Projected Image Area for Extraction
You can use the procedures in this section to specify the contour of the area that you want
to extract from a projected image.
Contour specification cannot be performed on a file that was saved after performing auto
trapezoid correction in the PC Image Mode, Scanner Mode, or Camera Image Mode
(page 93).
Contour specification may not be possible on certain files due to other reasons than the
one described above.
89