Casio YC-400 User Manual page 112

PJ Camera Software Operating Environment
I Shutter Release Sound
Use this setting to turn the shutter release sound on or off.
Configuring This Setting
Select the check box to turn on the shutter release sound. Clearing the check box turns off
the shutter release sound.
I [Display Startup Mode Dialog Box] button
Click this button to display the Startup Mode dialog box whenever PJ Camera Software is
started up. The settings you can configure with the Startup Mode dialog box are described
below.
Select the button next to the startup
mode you want to use by clicking it.
Clear this check box if you want
the Startup Mode dialog box to
appear each time you start up PJ
Camera Software, or select the
check box if you do not want the
Startup Mode dialog box to appear.
After configuring the settings you want, click the [OK] button.
If you changed the startup mode setting, the startup mode change as soon as you click
[OK].
For information about startup modes, see "PJ Camera Software Startup Modes"
(page 13).
112