Casio YC-400 User Manual page 11

Precautions when Using the PJ Camera Software
I Administrator Privileges Required
You must be logged in with administrator privileges on the PC in order to use PJ Camera
Software. An error will occur if a user logged in without administrator privileges attempts to
use it.
Note the following precautions when there are multiple users logged onto a computer
running Windows XP.
Do not use the Windows XP Switch User function to switch users while PJ Camera
Software is running. To change Windows XP users, you should exit PJ Camera Software,
the current user should log out, the new user should log in, and PJ Camera Software
should be restarted.
An error will occur if you attempt to use PJ Camera Software after using the Windows
XP Switch User function to switch users. If this happens, restart Windows, log in as the
new user, and then restart PJ Camera Software.
I Software Operation Conditions
Image projection in the PC Image Mode and image rotation are supported only when the
camera is mounted on the PJ Camera Stand.
11