Wx2 = Cycle Complete Codes; Plc Input Words: Module Data; Plc - Siemens SIMATIC 505 User & Programmers Manual

PLC Input Words: Module Data

2.3.2
WX2 = Cycle
Complete Codes
2-6 Software Interface
PLC (continued)
The cycle-complete-code word immediately reports the completion of each
cycle to the PLC. See Table 2-2. For example, WX2 = binary value 0000 0000
0001 0000 means that the Clamp Open profile just completed.
Table 2-2 WX2 = Cycle Complete Codes
(16-Bit Word)
Bit 1(MSB) Bit 16(LSB)
[.... .... .... ...1]
[.... .... .... ..1.]
[.... .... .... .1..]
[.... .... .... 1...]
[.... .... ...1 ....]
[.... .... ..1. ....]
[xxxx xxxx xx.. ....]
NOTE: See real-time process status words (V12–V16 in upload table) for bits
that indicate type of completion.
Cycle Complete Code
Clamp closure complete
Injection complete
Pack and hold complete
Plasticate cycle complete
Clamp opening complete
Overlapping cycle complete
Reserved