Agency Standards; European Community (Ce) Approval; Technical Assistance - Siemens SIMATIC 505 User & Programmers Manual

Agency Standards

European
Community (CE)
Approval
Technical
Assistance
Series 505 products have been developed with consideration of the draft
standard of the International Electrotechnical Commission Committee
proposed standard (IEC–65A/WG6) for programmable controllers (released
as IEC 1131–2, Programmable Controllers, Part 2: Equipment
Requirements and Tests, First Edition, 1992–09). The 575 controller system
is designed to be compatible with ANSI/IEEE Std. 1014–1987. Contact
Siemens Energy & Automation, Inc., for information about regulatory
agency approvals that have been obtained on Series 505 units.
Agency approvals are the following:
UL-listed (industrial control equipment)
CSA-certified (process control equipment) or CUL (Canadian UL)
FM (Class I, Div. 2, Group A, B, C, D Hazardous Locations)
All Series 505 products carry the CE Marking (Low Voltage Directive
73/23/EEC and Electro-Magnetic Compatibility Directive 89/336/EEC). A
declaration of conformity is included with each CPU.
For technical assistance, contact your Siemens Energy & Automation, Inc.,
distributor or sales office. If you need assistance in contacting your U.S.
distributor or sales office, call 1–800–964–4114.
For additional technical assistance, call the Siemens Technical Services
Group in Johnson City, Tennessee at 423–461–2552, or contact them by
e-mail at simatic.hotline@sea.siemens.com. For technical assistance
outside the United States, call 49-911-895-7000.
Overview 1-3