Display; Navigating To The Run Screen - Hardi AutoSlant UC7 Instruction Book

Display

Navigating to the Run Screen

To navigate to the AutoSlant run screen:
1. At your terminal, go to the NORAC UC7 universal terminal.
÷
NOTE! The method to enter the NORAC UC7 universal
terminal may differ depending on the controller terminal
used.
2. Press the check button "V" to accept the Liability Notice
Screen and enter the AutoSlant work screen.
μ
ATTENTION! The liability notice needs to be accepted
before you can operate the AutoSlant from:
• The widget on the HC 8700/9700 terminal.
• From the work screen on the HC 8500/9500 or HC
8600/9600 terminals.
3. The run screen appears.
÷
NOTE! To view Run Screen functions, refer to "Run Screen"
on page 47.
NORAC UC7 Liability Notice
By pressing the [F] button you
acknowledge that you have read and
understand the operator's manual and
assume responsibility for safe
installation and operation of this
system. Safe operation includes, at
a minimum, maintaining appropriate
speed, having an operator present in
the cab when in AUTO or MANUAL mode,
and manually overriding the system
if necessary.
3 - Description
13