Advertisement
Available languages
Available languages
STEP:10
1) pre-assemble the drink holder base (#93) with bottle holder grey (#110)
together with screws(#112)
2) set holder assy to the upright tube with screw (#111)
STEP:11
As photo shown
1) Plug the power cord with power adaptor (#92) into an appropriate outlet
IMPORTANT: The elliptical exerciser is not compatible with
GFCI-equipped outlets.
2) The other end of the access hole in the rear of the base frame
Note! before plug in, please check the voltage specifications
on the label.
JOYSPORT
www.joysport.nl11
DRINK HOLDER & STORAGE RACK ASSY.
POWER ADAPTOR
NO
PARTS LIST
QUANTITY
#111
8
#63
4
#112
4
NO
PARTS LIST
QUANTITY
#34
1
11
Advertisement
