Page 1
OPERATING, MAINTENANCE & PARTS MANUAL SUPPLEMENT HAND-OPERATED LEVER HOIST BANDIT LOAD LIMITER SETTING INSTRUCTIONS P/N 192042328 REV AA September 2017...
Page 2
CM Hoists may cause load loss. To avoid personal injury: STEP 2: Using hammer and punch, remove tang from adjusting ring. Use only CM supplied replacement parts. Parts may look alike but CM parts are made of specific materials or processed to achieve specific properties.
Page 3
See Table 1. DISASSEMBLY AND ASSEMBLY When disassembling and re-assembling the units, please refer to the maintenance section of the CM Bandit O&M Manual (P/N BANMANUAL) and this supplement so that all parts are properly installed. Prior to re-assembly, check all parts for excessive wear, cracks and distortion.
Need help?
Do you have a question about the BANDIT and is the answer not in the manual?
Questions and answers