Advertisement
Render Depth Mode
This tool provides the 2D views within a
specific depth of the 4D rendered image.
The system takes into account the depth
inside the heart
1. Press Depth mode on the touch panel
Vivid E9
(Render Depth Mode – cont.)
Example: Position the intersection of the
Laser Lines set towards the LVOT
Note: If measurements are needed, it can
be performed either on the 2D slice or on
the 4D render image
1. Select measure, for 2D slice use the
regular 2D measurements
2. For render image, press Generic Folder
3. Select Caliper (Crop plane) or Area
(Crop plane)
EchoPAC
Example 1: Position the intersection
of the Laser lines set on the tip of the
posterior MV leaflet
4D Workflow Tools
Advertisement
