Advertisement
(4D LV Mass – cont.)
5. To edit, Select Epi, Endo, or Endo + Epi on touch panel to determine which
needs to be edited
6. To complete, Select Approve & Exit or to continue to 4D strain:
Note: Epi is default, therefore focus should be on this edit. Endo border was
originated from EDV stage, therefore should already be edited by user
4D Strain
Note: 25 FPS is recommended lower limit for 4D Strain or results
may not be accurate
1. Select 4D Strain ROI
2. Contour will appear on all three views.
3. Review tracing quality and Edit if needed.
4. To edit, Select Epi, Endo, or Endo + Epi on touch panel to determine
which needs to be edited
4D Strain
Advertisement
