Advertisement
(Biplane Prepare – cont.)
7. Once the position of the Laser lines is
set properly press Biplane button
the touch panel. The image switches to a
standard biplane mode, with high frame
rate and high resolution of 2D image
Note: This tool is available only in LIVE mode (during scanning). When using
the 3V-D and 4V probe, Biplane prepare mode button
page of the touch panel. When using the 6VT-D probe, Biplane prepare
is on the 1st page of the touch panel.
button
Laser Lines
This tool provides an enhanced correlation and the position between the 2D
slice images and the rendered image
From the Vivid E9—From the touch panel, go to page 2
and Press Laser Lines
Select either Red or Color ( White and Yellow )
From EchoPAC—In the Menu bar, 3 selections
Off – no Laser lines
Middle – Red
Right – Color
on
is on the 2nd
4D Workflow Tools
Advertisement
