NewAir NEC500SI00 Owner's Manual page 11

COOLER/HUMIDIFIER BUTTON
Cooler/Humidifier
Indicator
Please note that if the initial fan speed is set to 3, the unit will revert back to
the second speed setting for 5 minutes. After 5 minutes, the unit will
automatically switch to the third fan speed. This allows the cooling pad to
absorb sufficient water for optimized cooling. The cooler will not revert back to
other speeds if the initial fan speed was set to either 1 or 2.
MODE BUTTON
The NEC500SI00 has 2 different automatic airflow modes. Setting the airflow
mode is optional.
To set the airflow mode, press the MODE button.
Natural
Mode
Sleep Mode
After the desired fan speed has been selected, press the
COOLER/HUMIDIFIER button to activate the
cooling/humidifying function. This powers the water
pump, cools the air and adds moisture to your air at the
same time. The blue cooling icon will also be visible on
the display panel.
Natural Mode – Indicated by the palm tree icon on the display
panel, this setting will adjust the airflow speed between low,
medium and high.
Sleep Mode – Indicated by the moon icon on the display
panel, this setting will gradually lower the speed at different
intervals, depending on the selected fan speed. If the fan
speed is set to 3, the cooler will run for 30 minutes on high
speed, 30 minutes on medium speed, and then continue to
operate on low speed. If the fan speed is set to 2, the cooler
will run for 30 minutes on medium speed and then continue
to operate on low speed. If the fan speed is set to 1, the
cooler will continuously run on low speed.
11
newair.com