Table of Contents
Advertisement
2. RS-232 Command Code
CMD
Power On
Power off
Power
Power Status
VGA/YPbPr
VGA/YPbPr-2
YPbPr
DVI-A
DVI-D
Source Selection
HDMI
(depend on models)
HDMI-2
Network
Composite
SVIDEO
Current source
Mute On
Mute Off
Mute Status
Audio
Volume +
Volume -
Volume
Contrast +
Contrast -
Contrast value
Brightness +
Brightness -
Brightness value
Aspect 4:3
Picture Setting
Aspect 16:9
(depend on models)
Aspect Auto
Aspect Real
Aspect Letterbox <CR>*asp=LBOX#<CR>
Aspect Wide
Aspect
Anamorphic
ACTION
<CR>*pow=on#<CR>
<CR>*pow=off#<CR>
<CR>*pow=?#<CR>
<CR>*sour=RGB#<CR>
<CR>*sour=RGB2#<CR>
<CR>*sour=YPbr#<CR>
<CR>*sour=dviA#<CR>
<CR>*sour=dvid#<CR>
<CR>*sour=hdmi#<CR>
<CR>*sour=hdmi2#<CR>
<CR>*sour=net#<CR>
<CR>*sour=vid#<CR>
<CR>*sour=svid#<CR>
<CR>*sour=?#<CR>
<CR>*mute=on#<CR>
<CR>*mute=off#<CR>
<CR>*mute=?#<CR>
<CR>*vol=+#<CR>
<CR>*vol=-#<CR>
<CR>*vol=?#<CR>
<CR>*con=+#<CR>
<CR>*con=-#<CR>
<CR>*con=?#<CR>
<CR>*bri=+#<CR>
<CR>*bri=-#<CR>
<CR>*bri=?#<CR>
<CR>*asp=4:3#<CR>
<CR>*asp=16:9#<CR>
<CR>*asp=AUTO#<CR>
<CR>*asp=REAL#<CR>
<CR>*asp=WIDE#<CR>
<CR>*asp=ANAM#<CR>
ASCII
(DDP2000)
93
condition
Execute under Standby
Execute under power on
Execute under power on
1.power on
2. System will execute after Audio
commanding, but audio related
OSD will refresh until turn-off
and reopen OSD
1. Execute under power on and
connecting to source
2. System will execute after
commanding,
bright ,contrast,& aspect related
OSD will refresh until turn-off
and reopen OSD
3.Unable to execute under freeze
on or blank on status
but
Hide quick links:
Advertisement
Table of Contents
