BenQ MP512 Product Service Manual page 14

Local Keyboard Description (Detailed description refer to SW Specification)
Key Name
Power
Source
Auto
Blank
Mode/Enter
Menu/Exit
Right/Panel Key
Lock
Left/Q?
Up
Down
Remote Control Keys Description (Detailed description refer to SW Specification)
IR-Key Name
Power
Source
Menu/Exit
4/ Panel Key Lock
3/ Q?
5
6
Auto
Mode/Enter
Freeze
Blank
Timer
Digital Zoom in
Digital Zoom out
External Status indicator
LED Name
Power LED
Lamp Status LED
Temperature Status LED
Detailed Description
Use this button to turn your Data Projector on and off (standby mode).
To select input sources as Computer, Video, S-Video, YpbPr
Toggle auto-tracking image function
Press "Blank" key first to blank the screen
(1) When there is no OSD menu, this bottom is Mode hot key; user would press
this bottom to choose one of preset modes
(2) When there is confirm message, user could press this key to confirm
Press this key to open/exit the OSD menu
(1) When user press the bottom once, it will enter "Panel Key Lock" setting
(2) When panel key is locked, user could press this key for 3 seconds to release
Panel Key Lock
(3) When there is OSD menu, user can press this key to move to right item
(1) When user presses the bottom once, it would show main "Information"
menu; and then user could press ▲▼ to choose questions group.
(2) If there is OSD menu, user can press this key to move to the left item
(1) Move item bar. (2) Move to page level. (3) Keystone+.
(1) Move item bar. (2) Move to page level. (3) Keystone-.
Detailed Description
Use this button to turn your Data Projector on and off (standby mode).
To select input sources as Computer, YPbPr , Video, S-Video
(1) OSD pop-up. (2) Move next item
(1) When user press the bottom once, it will enter "Panel Key Lock" setting
(2) When panel key is locked, user could press this key for 3 seconds to release
Panel Key Lock
(3) When there is OSD menu, user can press this key to move to right item
(1) When user presses the bottom once, it would show main "Information"
menu; and then user could press ▲▼ to choose questions group.
(2) If there is OSD menu, user can press this key to move to the left item
(1) Move item bar. (2) Move to page level. (3) Keystone+.
(1) Move item bar. (2) Move to page level. (3) Keystone-.
Toggle auto-tracking image function
(1) When there is no OSD menu, this bottom is Mode hot key; user would press
this bottom to choose one of preset modes
(2) When there is confirm message, user could press this key to confirm
This button will freeze a picture. Press again to resume motion.
Press "Blank" key first to blank the screen.
Call out the "Presentation Timer" setup OSD and user can set timer to remind
presenter.
By press this key, the center of picture can be magnified gradually.
By press this key, the size of the magnified image will be reduced.
Detailed Description
Display the power on/off sequence status
Display the Lamp status (Lamp fail, Lamp spoil etc.)
Display the Thermal status (Fan Fail, Over Temperature, etc.)
14