BenQ MP512 Product Service Manual page 8

2.6.3 Focus unbalance
2.7 Lateral Color
2.8 Image Quality
2.8.1 DMD Image Quality
2.8.2 Image Imperfection
2.8.3 Image Shadow or Blur
3.0 Mechanical Specification
3.1 Dimensions
3.2 Weight
3.3 Security Slot
3.5 Lens Cover
3.6 Feet
4.0 Packaging
4.1 Outside Dimensions
4.2 Weight
4.3 Transportation
5.0 Thermal Specification
5.1 Surface held or touched
for short periods
5.2 Surface which may be
touched
5.3 Exhaust Air
6.0 Environmental
6.1 Temperature
6.2 Humidity
6.3 Audible Noise Level
Slight flare is not counted as flare.
Adjust focus from near to far until one corner clear, difference less
than 50 cm
R-G
G-B
R-B
setups
1. 50" (Diagonal at 2m) image size.
2. Default preset mode " Dynamic"
3. Full white pattern to check the image.
Let the projector on the desk (don't move it up/down or left/
right) and just inspect the pattern.
4. Compare to the limit sample of OOB. (Right side blur sample
→ MP611 S/N: 245747-00013; Bottom side blur sample →
MP611 S/N: PDM8601819SU0) If blur or shadow worse than
OOB, than NG
255 x 214 x 90 mm (L x W x H)
<2500g
Kensington compatible slot 150N break away force
Lens Cover (Refer to C109)
Fast adjustable foot in front, Adjustable foot and Fixed foot in
rear. foot Tilt:0-6∘,right/left: +2.2∘/-0.5
Detail refer to C309 (Packing Description)
325 x 165 x 297mm (L x W x H)
<3700g
40 feet container 3528 sets, 20 feet container 1708 sets
By air(A pallet ) 48 sets (C pallet ) 56 sets
(B pallet ) 40 sets
Mechanical component temperature at ambience 0~40℃
Normal surface:
Metal < 60°C; Plastic<85°C
Bottom surface: @ 25° C
Metal < 55°C; Plastic<70°C
Metal
<70°C
<95°C
Operating
0~40°C, without condensation
Storage -20~60°C, without condensation
Operating 10~90%RH, without condensation
Storage 10~90%RH, without condensation
Normal mode: 31dBA @ 25°C
Typical
Eco mode: 26dBA @ 25°C
8
Center of
49"diagonal area
<2/3
<2/3
<1
∘
Plastic
<95°C
All other area
<1
<1
<1