Table of Contents
Advertisement
IN STALL ATI ON
—
2 – Installation
2.7 Verizon mobile network configuration
The following items are required for Verizon mobile
network configuration:
• PROCET PoE injector as the power supply
(included in sales package)
• MultiTech MTCM-LNA3-B03 USB modem
(included in sales package)
• Verizon SIM card (purchased)
From the Gateway Basic Page:
• Select as Connection Priority: 3G/4G
• Select for USB Dongle Type: MultiTech MTCM-
LNA3-B03 for Verizon
• Type or confirm APN: VZWINTERNET
• Type or confirm Service: umts
• Type or confirm Dial Number: *99***1#
Verizon mobile network configuration
Smart sensors
Gateway
USB modem
• Type or confirm Device: /dev/ttyACM0
• Select Peer DNS: 1
Press Apply at the bottom of the screen.
From the Gateway Other page:
• Scroll down to the Actions section.
• Click on the Reboot button.
• Wait for the reboot to finish.
NOTE! With a USB dongle the gateway needs to be
in place where there is a good network coverage.
11
PoE injector
Mains socket
Advertisement
Table of Contents
