Saving Embroidery Patterns To The Computer - Brother NV1500 Operation Manual

USING THE MEMORY FUNCTION
c
Press
a
b
a Amount of memory currently being used
b Total amount of machine memory available for saving
patterns
c Pockets where a pattern is saved (The amount of
memory used by the pattern is indicated on the
pocket.)
d
Press
* If you decide not to delete the pattern, press
→ The "Saving" screen appears. When the pattern is
saved, the previous screen appears automatically.
Memo
• If there is enough memory available after deleting
the pattern, the pattern that you want to save will be
saved automatically. If there is not enough memory
available after deleting the pattern, repeat the above
procedure to delete another pattern from the
machine's memory.
• It takes a few seconds to save a pattern in the
machine's memory.
• See page 143 for more information about retrieving
saved patterns.
142
.
c
.
Saving Embroidery Patterns to the
Computer
Using the included USB cable, connect the sewing
machine to your computer so that embroidery patterns
can be retrieved from and saved to your computer.
Note
Do not turn off the machine while the "Saving" screen
is displayed, otherwise you may lose the pattern that
you are saving.
a
Plug the USB cable connectors into the
corresponding USB ports on the computer
and on the machine.
* The USB cable can be plugged into the USB ports
on the computer and machine whether or not they
are turned on.
a
b
.
a USB port
b USB cable connector
→ The "Removable Disk" icon appears in "My
Computer" on the computer.
Note
• The connectors on the USB cable can only be
inserted into a port in one direction. If it is difficult to
insert the connector, do not insert it with force, and
then check the orientation of the connector.
• For details on the position of the USB port on the
computer (or USB hub), refer to the instruction
manual for the corresponding equipment.
b
a