Brother NV1500 Operation Manual page 185

ERROR MESSAGES
• Be sure to rethread the machine. If you press the
"Start/Stop" button without rethreading the
machine, the thread tension may be wrong or the
needle may break and cause injury.
184
This message is displayed when
the pattern selected in embroidery
mode is larger than the
embroidering area of the medium
embroidery frame while the small
or medium embroidery frame is
attached.
This message is displayed when
the upper thread is broken or not
threaded correctly, and the "Start/
Stop" button or the "Reverse/
Reinforcement Stitch" button is
pressed.
CAUTION
This message is displayed when
using USB cable to download
information from PC to machine.
This message is displayed when
the patterns you are editing take up
too much memory, or if you are
editing too many patterns for the
memory.
This message is displayed when
the "Start/Stop" button is pressed
while a pattern is being edited in
embroidery edit mode.
This message is displayed when you
try to use the needle threader lever
while twin needle sewing is set.
This message is displayed when a
buttonhole stitch is selected and
the "Start/Stop" button or the
"Reverse/Reinforcement Stitch"
button is pressed while the
buttonhole lever is raised.
This message is displayed when
the "Start/Stop" button, "Reverse/
Reinforcement Stitch" button,
"Thread Cutter" button or "Presser
Foot Lifter" button is pressed while
the presser foot lever is raised/the
needle is lowered.
This message is displayed when you
try to combine more than 70 patterns.