Automatic Thread Cutting - Brother NV1500 Operation Manual

USEFUL FUNCTIONS
c
Place the fabric under the presser foot with the
needle at the starting point of the stitching, and
then press the "Start/Stop" button. The
machine will automatically sew reverse stitches
(or reinforcement stitches), and then begin
sewing.
a
a
Reverse stitches (or reinforcement stitches)
Memo
If you press the "Start/Stop" button to pause sewing,
then press it again to continue, reverse stitches (or
reinforcement stitches) will not be sewn.
d
If the "Reverse/Reinforcement Stitch" button
is pressed, the machine automatically sews
reverse stitches (or reinforcement stitches),
then stops.
a
Reverse stitches (or reinforcement stitches)
Memo
To cancel the automatic reverse/reinforcement
stitching setting, press
as .

Automatic Thread Cutting

If the automatic thread cutting setting is selected before
sewing, the machine will automatically sew
reinforcement stitches (or reverse stitches, depending
on the selected stitch pattern) and cut the thread when
the "Reverse/Reinforcement Stitch" button is pressed at
the end of stitching. This is useful when sewing
buttonholes and bar tacks.
Memo
• The automatic thread cutting setting can be selected
when the automatic reinforcement/reverse stitching
setting is selected.
• The automatic thread cutting setting is already
selected with embroidery patterns.
a
Select a stitch pattern.
44
a
again so that it appears
b
Press to select the automatic thread
cutting setting.
→ The key appears as
c
Place the fabric under the presser foot with the
needle at the starting point of the stitching, and
then press the "Start/Stop" button. The
machine will automatically sew reverse stitches
(or reinforcement stitches), and then begin
sewing.
a
a Reverse stitches (or reinforcement stitches)
Memo
If you press the "Start/Stop" button to pause sewing,
then press it again to continue, reverse stitches (or
reinforcement stitches) will not be sewn.
d
If the "Reverse/Reinforcement Stitch" button
is pressed, the machine automatically sews
reverse stitches (or reinforcement stitches),
then cuts the thread.
a
Reverse stitches (or reinforcement stitches)
Memo
To cancel the automatic thread cutting setting, press
again so that it appears as
.
a
.