Automatic Thread Cutting; If The Upper Thread Is Too Tight; If The Upper Thread Is Too Loose; Automatic Thread Cutting (End Color Trim) - Brother NV1500 Operation Manual

■ If the Upper Thread Is Too Tight

The upper thread is too tight when the bobbin
thread is visible from the right side of the fabric.
Right side of fabric
a
Press .
b
Press in the tension display.
* Each press of the key decreases the value and
weakens the upper thread tension.
c
Press .

■ If the Upper Thread Is Too Loose

The upper thread is too loose when there are loose
thread locks or when loops appear on the right side
of the fabric.
Right side of fabric
Wrong side of fabric
Wrong side of fabric
SEWING AN EMBROIDERING PATTERN
a
Press .
b
Press in the tension display.
* Each press of the key increases the value and
tightens the upper thread tension.
c
Press .
Automatic Thread Cutting (End Color
Trim)
If the automatic thread cutting setting is selected before
embroidering, the machine will automatically cut the
thread at the end of each color when the machine is
stopped. To cancel the setting, press
press again so that it appears as
, and then
.
5
137