Lincoln Electric PRISM COMPACT Operator's Manual page 13

®
PRISM COMPACT
Step 5 - Install Filters (See section D for filter
replacement instructions)
WARNING
Before opening door, unit must be off and the power
switch on the side of the control panel turned to the off
position.
a. Unlock door latches
FIGURE A.5
b. Unclamp lter handles
FIGURE A.6
c. Install new lters.
Unit ships with
door latches
d. Reclasp lter handles
locked. Unlock
latches using the
supplied hex tool
(or standard 5/16"
hex wrench), then
open door.
Step 6 - lock door
To prevent accidental door opening during unit operation, lock
1. Unclasp
door latches using the supplied hex tool (or standard 5/16" hex
handles for
wrench.
lter
installation.
A-5
INSTALLATION
FIGURE A.7
1. Slide lters
into unit as
shown,
making sure
they are
pushed
against rear
of unit.
FIGURE A.8
1. Reclasp lter
handles to lift
sealed
position.
2. Close and
latch door.
FIGURE A.9
lters to their