10-Troubleshooting
Many occurring problems could be solved by yourself without specifi c expertise. In case
of a problem please check all shown possibilities and follow below instructions before you
contact an after sales service. See CUSTOMER SERVICE.
WARNING!
Before maintenance, deactivate the appliance and disconnect the mains plug from
the mains socket.
Electrical equipment should be serviced only by qualifi ed electrical experts, because
improper repairs can cause considerable consequential damages.
A damaged power cable should only be replaced by the manufacturer, its service
agent or similarly qualifi ed persons in order to avoid a hazard.
Troubleshooting with display code
Code Cause
Drain pump error.
The condenser thermal sensor is open-circuited or
short-circuited.
Temperature of the laundry in the drum does not change. Contact the customer service.
Communication failure between PCB and display.
Temperature is too low.
The door is not closed or door lock failure.
Note:only for HD100-A 2 979.
Should the error codes reappear even after the taken measures, switch off the appliance,
disconnect the power supply and contact the customer service.
22
Solution
Contact the customer service.
Contact the customer service.
Contact the customer service.
Use the dryer when air tem-
perature is higher than 5 °C.
Close the door or contact the
customer service.
EN