Haier HD90-A2979 User Manual page 23

EN
Troubleshooting without display-codes
Problem Possible cause
Tumble dryer • Poor connection to the power
fails to operate.
• Power failure.
• No drying program is set.
• Device has not been switched
• The water tank is full.
• The door is not closed properly.
Tumble dryer • The laundry has reached the
fails to operate
and the display
shows . • There is no laundry in the drum?
Drying time is • The programme setting is not
too long and
the results are • The fi lter is clogged.
not satisfactory • The evaporator is blocked.
• The tumble dryer is overloaded.
• The laundry is too wet.
• The vent duct is blocked.
Remaining time- The remaining time will be adjus-
on the display- ted continuously based upon the
stops or skips. following factors:
• Type of laundy.
• Loaded amount.
• Moisture degree of the laundry.
• Ambient temperature.
10-Troubleshooting
supply.
on.
dry level defi ned by the pro-
gramme?
correct.
Possible solution
• Check connection to the pow-
er supply.
• Check the power supply.
• Set a drying program.
• Switch the device on.
• Empty the water tank.
• Close the door properly.
• Check if the program setting
is appropriate.
• Check if there is laundry in the
drum.
• Make sure the program is set
correctly.
• Clean the fi lter screen.
• Clean the evaporator.
• Reduce the amount of laun-
dry.
• Spin the laundry properly be-
fore drying.
• Check the vent duct and unblock
it.
The automatic adjustment is a
normal operation.
23