Cardo Systems Scala-rider Q2 User Manual page 2

| scala-rider Q2
INTRODUCTION
Congratulations, and thank you for having chosen the scala-rider Q2
Bluetooth® Headset for bikers. This Manual will help you operate the
headset, but you should first familiarize yourself with the Bluetooth
functionality of your cellular phone and/or GPS device before using
the scala-rider Q2.
The retail box of the scala-rider Q2 contains one headset unit. When
paired with another scala-rider Q2, the headsets can be used as an
Intercom at a range of up to 1,640 ft (500m).
The scala-rider Q2 offers the following uses:
1. Bluetooth headset for mobile phone communication,
supporting headset* and Handsfree* profiles (10m range)
2. Bike-to-Bike Intercom Communication with another Q2
unit (up to 1,640 ft. / 500 m range) in Full Duplex** mode
[purchased separately]
3. Turn-by-Turn GPS Navigation instructions and Streaming
Audio from compatible Bluetooth devices
4. FM Radio – built in FM radio receiver with six preset stations
The scala-rider Q2 can establish an audio connection with one
Bluetooth device at a time. Please read the section "Using the
Headset" to see how you can switch the audio connection between
the paired devices.
____________________
* Mobile phones that do not support the Bluetooth Handsfree profile may
prevent you from using the Redial and Call Reject features
** Full duplex calls allow you to speak and hear the other party speak
simultaneously
QGQ2_A5_021.indd 2
™
| INTRODUCTION | CONTENTS OF RETAIL BOX
CONTENTS OF RETAIL BOX
Headset
CTRL – Control Button
• Power On, Power O
• Answer/End
Helmet Clamp
Right Speaker
(long cord)
Sliding Plate
Microphone
NOTE: The use of two speakers may
be illegal in certain jurisdictions.
Please check the local regulations
and act accordingly.
2
Volume
Up
Charging
Jack
Volume
Down
MC – Multi-Connection
• Radio On/O /change stations
• Initiate/Terminate Buddy
Intercom call with Primary or
Secondary Buddy
Tab
Left Speaker
(short cord)
2/19/08 1:51:45 PM