Related Manuals for Cardo Systems Scala rider
Summary of Contents for Cardo Systems Scala rider
- Page 2 Audio & Microphone User Guide Thank you for purchasing a SCALA RIDER® accessory. This User Guide Allen Wrench will help you attach the Audio & Microphone Kit onto your helmet and allow you to enjoy its MP3 player option. CONTENTS OF RETAIL BOX...
-
Page 3: Standard Method
Audio & Microphone User Guide ATTACHING THE CLAMP ON THE HELMET 2. Slide the Back Plate between the internal padding and the external shell of the helmet. The Helmet Clamp must be attached onto the left part of the helmet. Once attached, the headset unit can be mounted or released from the Helmet Clamp at any time. - Page 4 Audio & Microphone User Guide Glue Plate Method 2. Determine the location on the helmet where the Helmet Clamp must be attached. You have the option to glue the Helmet Clamp onto your helmet, when the above standard method cannot be used, or in case you 3.
- Page 5 Audio & Microphone User Guide 6. Place the Glue Plate into position according to #3. Press firmly 15 Attach the speakers to the Velcro inside your Speaker A seconds on all 3 parts of the Glue Plate helmet opposite your ears (short speaker cord for the left ear [A] and the long speaker cord 7.
- Page 6 NOTE: Volume can only be adjusted through the MP3 Player. Any other audio connection (Phone call/FM Radio/Intercom call) Your SCALA RIDER headset can be connected to an MP3 player/au- will automatically mute the MP3 Player/Audio device’s signal. dio device by simply plugging it to the Clamp’s jack with the MP3...