Settings Menu - LEGRAND KEOR T EVO 10-60 KVA Installation & Operation Manual

Description of the Symbols Used in the Manual
Description of the Symbols Used in the Manual
This symbol points out the instructions which are especially important.
This symbol points out the instructions which are especially important.
This symbol points out the risk of electric shock if the following instruction is
not followed.
This symbol points out the risk of electric shock if the following instruction is
This symbol points out the instructions, which may result with injury of the
not followed.
operator or damage of the equipment if not followed.
This symbol points out the instructions, which may result with injury of the
All packing material must be recycled in compliance with the laws in force in the
operator or damage of the equipment if not followed.
country where the system is installed.
All packing material must be recycled in compliance with the laws in force in the
7.2.3.

Settings Menu

country where the system is installed.
Description of the Symbols Used in the Manual
This menu is the section where all the settings related to UPS usage customization can be done.
User Password must be entered to make changes in this section.
UPS: Uninterruptible Power Supply
User Password: 1111 (the password cannot be changed)
Description of the Symbols Used in the Manual
ESD: Emergency Switching Device
RS232: Serial Communication Protocol
UPS: Uninterruptible Power Supply
RS485: Serial Communication Protocol
ESD: Emergency Switching Device
MODBUS: Modicon Communication Protocol
RS232: Serial Communication Protocol
SNMP: Simple Network Management Protocol
RS485: Serial Communication Protocol
V: Volt
MODBUS: Modicon Communication Protocol
A: Ampere
SNMP: Simple Network Management Protocol
P: Power
V: Volt
A: Ampere
For Mains Supply, Auxiliary Mains Supply, Output, Battery Circuit Breaker and Maintenance Bypass Circuit
Breaker;
P: Power
"ON": Closing the Circuit
"OFF": Opening the Circuit
For Mains Supply, Auxiliary Mains Supply, Output, Battery Circuit Breaker and Maintenance Bypass Circuit
Breaker;
"ON": Closing the Circuit
"OFF": Opening the Circuit
KEOR T EVO
KEOR T EVO
KEOR T EVO
Bypass voltage (Ph-N) and frequency information of
each phase are displayed. If the MAINS and AUX Supply
are connected in COMMON, Rectifier and Bypass values
will be the same.
Rectifier voltage (Ph-N), current and frequency
information of each phase are displayed. If the MAINS
and AUX Supply are connected in COMMON, Rectifier
and Bypass values will be the same.
When the Password Screen appears, enter 1111,
ENTER
touch to confirm.
49
51