AEG DVD 4539 HDMI Instruction Manual page 57

Various Settings
05-DVD 4539 AEG_GB_new.indd 57 05-DVD 4539 AEG_GB_new.indd 57
Proceed as follows to change the password:
1. In the „Set Password" line press the ENTER key (Fig. 3/13). A window
appears for entering the current password.
2. Enter the current password in the "Enter Password" line with the
Numeric buttons (Fig. 3/3) on the remote control.
In order to prevent unauthorised individuals from reading the pass-
word, only the symbols „****" are shown on the screen. Confi rm your
entry with the ENTER key (Fig. 3/13).
3. In order to set the new password, press the ENTER key in the "Set
Password" line.
4. Enter the new password in the "New Password" line with the Nume-
ric buttons on the remote control.
5. Confi rm the new password by entering it again and then pressing
the ENTER button. This is then briefl y confi rmed by the words „Set
Password Successful" on the screen.
Using Default Settings
Select the command „Use Default Settings/Yes" if you would like to
return the device to the factory presets.
All settings that you have made are lost.
Screen saver
The player is able to display a still image for any time on the screen. This
can cause damage to the screen. It is therefore recommended to activate
the screen saver.
The following options are available:
On: The screen saver is activated (default setting).
Off : The screen saver is deactivated.
English
57
26.05.2009 9:22:47 Uhr 26.05.2009 9:22:47 Uhr