pigtronix INFINITY 3 User Manual page 10

SERIES / PARALLEL
When Parallel is selected (RED), Loop 1 and Loop 2 can play together at the same time.
When Series is selected (GREEN), only one of the two loops can play at any given time. This is handy
for verse/chorus-type song structures.
Holding down the SERIES / PARALLEL button turns the switch ORANGE and activates the Expression
pedal options menu, allowing you to select between Loop Volume, Loop Aging and Varispeed
expression pedal functions using the rotary encoder.
STEREO / SPLIT
When Stereo is selected (RED), both loops record stereo audio coming from Inputs 1 and 2.
When Split in selected (GREEN), Loop 1 gets audio from Input 1 only and Loop 2 gets audio from
Input 2 only.
For more options and details, see the Infinity Rules Stereo / Split section below.
Holding down the STEREO / SPLIT button turns the switch ORANGE and activates the Remote Switch
Varispeed Interval menu, allowing you to set the desired musical interval by semitones up to 1
octave using the rotary encoder.
ARM / ALL
Quickly pressing the ARM / ALL switch will toggle between ALL (GREEN) and ARM (RED) modes.
When ALL is selected (GREEN), the Stop footswitch will stop playback on both loops. The All
functionality also applies to the erase command. With ALL selected, holding down the Stop footswitch
will erase both loops. The All functionality also applies to the Play command. Once the loops are
stopped, hitting either loop footswitch will resume playback on both loops.
When ARM is selected (RED), the Stop footswitch will stop playback only on the armed loop. The arm
functionality also applies to the erase command. In Arm mode, holding down the Stop footswitch will
erase only the armed loop (to stop both loops in Arm mode, hit the Stop footswitch twice within 1
second). The Arm functionality also applies to the Play command. When loops are stopped, pressing
a loop footswitch will only resume playback of the currently armed loop.
Certain Remote Switch functions also follow the Arm/All setting and many MIDI CC/Note messages
contain values that also specify Arm or All control. For more information, please see the description
of the Remote Switch functionality and MIDI implementation later in this manual.
Holding down the ARM / ALL button turns the switch ORANGE and activates the Loop Aging menu,
allowing you to select a loop aging value using the rotary encoder.
10