Check The Video Captured By The Camera - Canon VB-C60 Start Manual

Check the Video Captured by the Camera

When the initial settings are complete, check camera images using VB-C60 Viewer. At this time,
set the network options on the PC according to the IP address and subnet mask set in the
camera.
1. Click the MAC address of the camera whose operation you want to check, and then click
[Settings].
Click to select.
2. The web browser starts and the top page of the camera is displayed. Click [VB Viewer] of
[VB-C60 Viewer].
Note
There may be cautionary information that should be heeded depending on your operating
environment. See "Notes on Operating Environment" (
setting.
To open the Setting Page using the [Detailed Settings] button, do not change the HTTP port
of the camera from 80. For information on setting the HTTP port number, see "HTTP Server"
in Operation Guide.
Step 3 Perform Initial Setting of the Camera
P. 1-14) before you perform initial
2-13