Canon VB-C60 Start Manual page 49

Use of External Power Supply
An AC adapter, 12-VDC input or 24-VAC input can be used as an external power supply.
Connect the supplied power connector (
Screwdriver
Tightening torque:
0.2 N·m (1.77lbf·in) (max.)
approx. 4mm - 6mm
(0.16inch - 0.24inch)
Power Connector
(Supplied)
Use a 12-VDC or 24-VAC power supply insulated from 100 VAC.
12 VDC can be connected in a non-polar condition. Use the power supply within the following
voltage range.
24 VAC: Voltage fluctuation 24 VAC
(50 or 60 Hz
Current supply capacity per camera 1.0 A or more
12 VDC: Voltage fluctuation 12 VDC
Current supply capacity per camera 1.5 A or more
* If a 12-VDC battery power supply is used, be sure to connect a resistor of 0.5 to 1.0 Ω/20 W
or more to the power line.
* Use double-insulated devices for the external power supply.
Recommended Power Cable of VB-C60 [Reference]
Cable (AWG)
conductor size
(Φmm, Φinch)
Maximum cable length,
12 VDC (m, ft)
Maximum cable length,
24 VAC (m, ft)
Use a UL cable (UL-1015 or equivalent) for wiring 12 VDC or 24 VAC.
P. viii) as shown in the figure below.
Stripping length
±
±
0.5 Hz or less)
±
#24
(0.52 mm) (0.65 mm)
(0.020inch) (0.026inch)
5
(16.4) (29.5)
11
(36.1) (59.0)
This completes the network connection.
Step 2 Connect the Camera to the Network
10% or less
10% or less
#22 #20
(0.82 mm)
(0.032inch)
9 14
(45.9)
18 29
(95.1)
#18 #16
(1.03 mm) (1.30 mm)
(0.041inch) (0.051inch)
23 32
(75.4) (105.0)
46 64
(151.0) (210.0)
2-9