Battery:charge:current <Nrf; Battery:discharge:voltage <Nrf; Battery:discharge:current <Nrf - ITech IT-M3400 Series Programming Manual

BATTery:CHARge:CURRent <NRf+>
This command is used to set the battery charging current value.
Syntax
BATTery:CHARge:CURRent <NRf+>
Arguments
<MINimum-MAXimum|MINimum|MAXimum>
Example
BATT:CHAR:CURR 3.0
Query syntax
BATTery:CHARge:CURRent? [MINimum|MAXimum]
Returns
NR3
BATTery:DISCharge:VOLTage <NRf+>
This command is used to set the battery discharge voltage value.
Syntax
BATTery:DISCharge:VOLTage <NRf+>
Arguments
<MINimum-MAXimum|MINimum|MAXimum>
Example
BATT:DISC:VOLT 3.0
Query syntax
BATTery:DISCharge:VOLTage? [MINimum|MAXimum]
Returns
NR3
BATTery:DISCharge:CURRent <NRf+>
This command is used to set the battery discharge current value.
Syntax
BATTery:DISCharge:CURRent <NRf+>
Copyright © Itech Electronic Co., Ltd.
Battery Commands
77