Use the Start Button to Start Applications
This scanner supports Windows Event Driven Function. You can start
applications that are compatible with the Event Driven Function by pressing
[START] on the operation panel.
All applications that are compatible with the event function are enabled in the
initial status immediately after the scanner is set up. The following dialog box
opens when [START] is pressed if the scanner is in the "Ready" state.
Change the event settings as follows:
1.
Use the following procedure to open the "Event" settings dialog box.
1. Click the [Start] button
[Control Panel]. (For Windows XP, click the [Start] button
Panel].)
38
Using the Scanner
click [Settings] on the [Start] menu
click
click [Control