Back View; Operating Panel; Job No. Indicator; Job Select Button - Canon imageFORMULA DR-M140 User Manual

Feed Selection Lever
Use this to change the way documents are fed.
Set the lever to the lower position when scanning documents
consecutively. (See p. 26)
Set the lever to the upper position when scanning documents one
page at a time or scanning multi-page documents that are fastened
together. (See p. 26)
LED Indicator (Orange)
This lights during non separation feeding mode.

Back View

Kensington Slot
Connect an anti-theft key chain or the like.
Straight Path Tray
When using the straight path, scanned documents are output here.
USB Connector
Connect the supplied USB cable to this connector.
Power Connector
Connect the supplied AC adapter to this connector.

Operating Panel

Job No. Indicator

This displays the number of the job selected with the operating
panel, errors, and other information.

Job Select Button

This selects registered jobs. Every time the button is pressed, the
Job No. displayed in the Job No. Indicator changes.
DFR (Double Feed Release) Button
This is lit when a document double feed is detected. Pressing this
button cancels the double feed detection function, allowing you to
continue scanning.

Stop Button

This stops active jobs.

Start Button

This executes the job displayed in the Job No. Indicator.
22