Documents - Canon imageFORMULA DR-1210C User Manual

1. Documents

The scanner can scan documents of the following sizes:
Feeder
Width:
Length:
Thickness:
Document Feed
Tray capacity:
Flatbed (Platen Glass)
Width:
Length:
Make sure to thoroughly read the following cautions for scanning documents
using the feeder:
• When scanning a stack of documents using the feeder, make
sure that the documents are of the same size, stock, and paper
quality. Feeding documents of different sizes or types together
may cause a paper jam.
• Always make sure that the ink on a document is dry before
scanning it. Scanning documents with the ink still wet may soil
the rollers or scanning glass, cause lines or smudges to appear
on images, or dirty other documents.
• Always clean the rollers or scanning glass after scanning a
document written in pencil. Scanning documents with pencil
written on them may soil the rollers or scanning glass, cause
stripes to appear in images, or dirty other documents.
• When scanning a two-sided document that is printed on thin
paper, the image on the opposite side of each page may show
through. Adjust the brightness in the scanning conditions
before scanning the document.
• Scanning the following types of documents using the feeder
may cause paper jams or malfunctions. Scan documents like
these using the flatbed (platen glass).
Wrinkled or
creased documents
Curled paper
Torn documents
20
Using the Scanner
5.8" to 8.5" (148 mm to 216 mm)
3.9" to 14.0" (100 mm to 356 mm)
14 to 32 lb bond (0.0024" to 0.0059")
2
52 to 128 g/m (0.06 mm to 0.15 mm)
35 sheets maximum or stack height of approximately
0.14" (3.5 mm)
8.5" (216 mm)
11.7" (297 mm)
Extremely thin,
translucent paper
Carbon paper
Coated paper
Paper with square
holes
Documents with
paper clips or staples