Canon imageFORMULA DR-1210C User Manual page 41

Note
If Feeding Option in the scanner setup is set to [Auto-detection] or [Panel-
Feeding], the message "Waiting" is displayed on the display panel after
scanning is complete. In this case, perform one of the following operations:
• When Feeding Option is set to [Auto-detection]
Place another document on the feeder to resume scanning, or press [STOP]
on the operation panel to end scanning.
• When Feeding Option is set to [Panel-Feeding]
Place another document on the feeder and press [START] on the operation
panel to resume scanning, or press [STOP] on the operation panel to end
scanning.
STOP button
START button
Using the Scanner
37