Vitek VT-1300 Instruction Manual page 5

•
•
•
•
•
THE UNIT IS INTENDED FOR HOUSEHOLD USE ONLY,
ITS COMMERCIAL USAGE AND USAGE IN PRODUCTION
AREAS AND WORK SPACES IS PROHIBITED.
USING THE HAIR DRYER
After unit transportation or storage at low tempera-
ture keep it for at least three hours at room tempera-
ture before switching on.
– The unit is intended for operation from an AC power
– Before switching the unit on, make sure that your home
– Remove any advertisement stickers that can hinder
– Unwind the power cord completely.
– Insert the power plug into the mains socket.
– Select the required operation mode using the
T-1300_70x130.indd 5
If the power cord is damaged, it should be replaced
by the manufacturer, a maintenance service or similar
qualified personnel to avoid danger.
Do not use the unit if the power cord or the power plug
is damaged, if the unit works improperly and after it
was dropped.
Do not attempt to repair the unit. Do not disassemble
the unit by yourself, if any malfunction is detected or
after it was dropped, unplug the unit and apply to any
authorized service center at the contact addresses
given in the warranty certificate and on the website
www.vitek.ru.
To avoid damages, transport the unit in the original
package only.
Keep the unit in a dry cool place out of reach of chil-
dren and disabled persons.
network with the frequency of 50 or 60 Hz. The unit
does not need any additional settings for operating
with the required rated frequency.
mains voltage corresponds to the unit operating voltage.
the unit operation.
switch (1):
«1» – low temperature and high speed airflow;
«2» – medium temperature and low speed airflow;
«3» – maximal temperature and speed airflow.
ENGLISH
5
8/22/19 2:37