Aukey EP-T25 User Manual page 7

Notes
●
When you turn on the earbuds, they will automatically reconnect to the
last-paired device or enter pairing mode if no paired device is found
●
To clear the pairing list, touch and hold the touch-sensitive panels on both
earbuds for 10 seconds after powering off both earbuds
●
In pairing mode, the earbuds will automatically turn off after 2 minutes if no
devices are paired
●
If one of the earbuds has no sound output, put both earbuds back into the
charging case and take them out again
●
The wireless operating range is 10m (33ft). If you exceed this range, the
earbuds will disconnect from your paired device. The connection will be
re-established if you re-enter the wireless range within 2 minutes. The earbuds
will automatically reconnect to the last-paired device. To connect with other
devices, repeat the previous pairing steps
Controls & LED Indicators
Streaming Audio
Once paired, you can wirelessly stream audio from your device to the earbuds.
Music will automatically pause when you receive an incoming phone call and
resume once the call has ended.
Play or pause
Skip to next track
Skip to previous track
Tap the touch-sensitive panel on either earbud
Double-tap the touch-sensitive panel on right earbud
Double-tap the touch-sensitive panel on left earbud
- 05 -