Aukey EP-T25 User Manual page 6

Pairing
Starting with the earbuds in the case:
1. Open the lid of the charging case. Both earbuds will turn on automatically and
connect with each other
2. Turn on the pairing function on the device you want to pair with the earbuds
3. From the list of available devices, find and select "AUKEY EP-T25"
4. If a code or PIN is required for pairing, enter "0000"
Regular Use After Pairing
Once the earbuds are successfully paired with your device, they can be
switched on and off as follows:
●
Open the lid of the charging case, then both earbuds will turn on and connect
with each other automatically
●
To power off, put the earbuds back in the charging case and close the lid, and
they will begin charging
Using the Left/Right Earbud Only
Starting with the earbuds in the case:
1. Take the left/right earbud out
Turn on the pairing function on the device you want to pair with the earbud
2.
3. From the list of available devices, find and select "AUKEY EP-T25"
- 04 -